⚡ EBMX X-9000-V2 E-Ride Pro 3.0 Harness & Mounting Kit
Purpose-Built Wiring & Mounting for Your X-9000 V2 Setup
Upgrade the installation of your EBMX X-9000-V2 controller on an E-Ride Pro SS 3.0 with a circuit breaker using a purpose-built wiring harness, mounting hardware, and V3 battery wiring.
Designed for a clean, secure installation, this kit provides the connection and mounting components needed to integrate an X-9000-V2 controller with the compatible E-Ride Pro 3.0 platform.
⚠️ Controller NOT included. This kit is specifically for the X-9000-V2 controller and E-Ride Pro 3.0 models with a circuit breaker.
🔥 Built for a Clean X-9000 Installation
Whether you're replacing an existing harness or preparing an E-Ride Pro 3.0 for an X-9000-V2 controller installation, this kit brings the essential installation hardware together in one package.
🔌 Dedicated E-Ride Pro 3.0 Harness
Includes a wiring harness specifically designed for the E-Ride Pro SS 3.0.
This helps simplify the controller installation and provides the appropriate wiring interface for the compatible setup.
🛠️ Controller Mounting Hardware
The kit includes mounting brackets and hardware to securely position the compatible X-9000 controller on the E-Ride Pro 3.0.
🔋 V3 Battery Wiring
The package also includes V3 battery wiring, allowing the compatible controller installation to interface with the E-Ride Pro 3.0 battery system.
⚡ Designed for the Circuit-Breaker Version
This specific V2 harness is designed for the E-Ride Pro 3.0 with a circuit breaker.
This is an important compatibility detail when ordering.
✅ Why Choose This Kit?
🔧 Cleaner Installation
Get the harness, mounting brackets, hardware, and battery wiring together instead of sourcing installation components individually.
🏁 X-9000-V2 Compatibility
Purpose-built for installations using the EBMX X-9000-V2 controller on the compatible E-Ride Pro 3.0 platform.
📦 Complete Installation Hardware
The kit includes the core wiring and mounting components needed for the intended installation.
🔋 V3 Battery Wiring Included
The included V3 battery wiring is designed for the applicable E-Ride Pro 3.0 configuration.
🛠️ Purpose-Built Fitment
Designed around the E-Ride Pro 3.0 rather than using generic wiring or universal mounting hardware.
⚙️ What's Included?
-
🔌 Wiring Harness for E-Ride Pro SS 3.0
-
🛠️ Mounting Brackets
-
🔩 Mounting Hardware
-
🔋 V3 Battery Wiring
❌ Not Included
-
EBMX X-9000-V2 Controller
-
E-Ride Pro motorcycle/e-moto
-
Battery
-
Motor
-
Charger
-
Display
-
Throttle
The supplied product page confirms the kit contents and that the controller is excluded.
📋 Full Technical Specifications
| Specification | Details |
|---|---|
| Brand | EBMX |
| Product | X-9000-V2 E-Ride Pro 3.0 Harness & Mounting Kit |
| SKU | E-PU-AA27-XX-4 |
| Product Type | Controller wiring harness & mounting kit |
| Intended Controller | EBMX X-9000-V2 |
| Intended Bike | E-Ride Pro SS 3.0 |
| Circuit Breaker Configuration | With circuit breaker |
| Controller Included | No |
| Wiring Harness | E-Ride Pro SS 3.0 harness |
| Mounting Brackets | Included |
| Mounting Hardware | Included |
| Battery Wiring | V3 battery wiring |
| X-9000 V3 Compatibility | Not compatible |
| Motor | Not applicable — harness kit only |
| Motor Power — Nominal | Not specified for this product |
| Motor Power — Peak | Not specified for this product |
| Motor Configuration | Not applicable |
| Battery Voltage | Not specified for this product |
| Battery Capacity | Not specified for this product |
| Top Speed | Not specified for this product |
| Maximum Range | Not specified for this product |
| Torque | Not specified for this product |
| Tire Size | Not applicable |
| Suspension | Not applicable |
| Brakes | Not applicable |
| Payload Capacity | Not applicable |
| Charging Time | Not applicable |
| Frame Material | Not applicable |
| Product Weight | 680 g |
| Listed Product Price | $189.00 USD |
The product listing identifies the SKU as E-PU-AA27-XX-4, lists the kit weight as 680 g, and lists the product at $189.00.
🏁 Performance & Power Information
Important: This Product Does Not Generate Motor Power
The EBMX X-9000-V2 E-Ride Pro 3.0 Harness & Mounting Kit is an installation component, not the controller itself.
Therefore:
-
⚡ Motor wattage: determined by the controller/motor setup
-
🔋 Battery voltage: determined by the vehicle/battery configuration
-
🔋 Battery Ah: determined by the installed battery
-
🏁 Top speed: determined by the complete powertrain and tuning
-
📏 Range: determined by battery capacity, motor, controller tuning, rider, terrain, and riding conditions
-
⛰️ Hill climbing: determined by the complete motor/controller/battery system
-
🏜️ Terrain capability: determined by the E-Ride Pro 3.0 and its complete configuration
-
🌀 Torque: determined by the motor/controller/battery combination
For reference, the current X-9000-V3 controller is a separate product with substantially different published controller specifications, including 50 kW continuous rated power, 120 V maximum voltage, 48–93 V working voltage range, 1000 A continuous phase current and 1600 A burst phase current. Those numbers must not be represented as specifications of this V2 harness kit
🆚 Compatibility Comparison
Because this is a specialized harness rather than a complete vehicle or controller, the most useful comparison is installation compatibility, not motorcycle performance.
| Specification | EBMX X-9000-V2 E-Ride Pro 3.0 Kit | EBMX X-9000-V3 E-Ride Pro 3.0 — With Circuit Breaker | EBMX X-9000-V3 E-Ride Pro 3.0 — Without Circuit Breaker |
|---|---|---|---|
| Intended Controller | X-9000-V2 | X-9000-V3 | X-9000-V3 |
| E-Ride Pro 3.0 | Yes | Yes | Yes |
| Circuit Breaker | Required | Required | Not included/required configuration |
| Wiring Harness | Included | Included | Included |
| Mounting Brackets | Included | Included | Included |
| Mounting Hardware | Included | Included | Included |
| V3 Battery Wiring | Included | Included | Included |
| X-9000 V2 Compatible | Yes | No | No |
| X-9000 V3 Compatible | No | Yes | Yes |
| Product Weight | 680 g | 907 g listed | 907 g listed |
| Listed Price | $189 | $189 | $189 |
| Best For | Earlier X-9000-V2 installations | V3 controller + early 3.0 with breaker | V3 controller + later 3.0 without breaker |
The V3 versions specifically state that they are not compatible with V1/V2 X-9000 controllers, while the V2 product specifically states that it is not compatible with the V3 controller.
Which One Should You Buy?
Choose the X-9000-V2 kit if you have:
E-Ride Pro 3.0 + circuit breaker + EBMX X-9000-V2 controller.
Do not choose this kit if you have an X-9000-V3 controller.
For a V3 controller, the correct harness depends on whether your E-Ride Pro 3.0 has the circuit breaker or the later no-breaker configuration.
🔒 Compatibility First
Before ordering, verify these three things:
1️⃣ Your Controller
You need an EBMX X-9000-V2 controller.
2️⃣ Your Bike
You need an E-Ride Pro SS 3.0.
3️⃣ Your Bike's Electrical Configuration
This specific kit is for the E-Ride Pro 3.0 with a circuit breaker.
⚠️ If your E-Ride Pro 3.0 does not have a circuit breaker, don't assume this is the correct harness.
📦 What's in the Box?
Included:
-
EBMX E-Ride Pro SS 3.0 wiring harness
-
Mounting brackets
-
Mounting hardware
-
V3 battery wiring
Not included:
-
X-9000 controller
-
Battery
-
Motor
-
Charger
-
E-Ride Pro 3.0
-
Other vehicle components
🛡️ Trust & Support
🔐 Secure Checkout
Complete your purchase through a secure checkout process.
📦 Shipping
Shipping availability and applicable shipping charges are calculated according to the order destination.
💬 Customer Support
Need help confirming compatibility? Contact the store before ordering if you're unsure whether your E-Ride Pro 3.0 uses the circuit-breaker configuration.
🔍 Compatibility Inspection
Because controller harnesses are configuration-specific, verify the controller generation and bike configuration before installation.
🧾 Warranty
No product warranty terms were stated on the supplied product page, so no specific warranty period is claimed here.
❓ Frequently Asked Questions
Does the X-9000-V2 controller come with this kit?
No. This product specifically excludes the EBMX X-9000 controller.
Is this compatible with the X-9000-V3 controller?
No. The supplied product listing explicitly states that the V2 harness is not compatible with the V3 controller.
What E-Ride Pro does this fit?
This kit is designed for the E-Ride Pro SS 3.0 with a circuit breaker.
Does it include the battery wiring?
Yes. V3 battery wiring is included.
Does it include mounting hardware?
Yes. Mounting brackets and hardware are included.
Does this increase the bike's top speed?
The harness itself does not specify or independently increase top speed. Overall speed depends on the complete controller, motor, battery, gearing, vehicle configuration, and tuning.
Does it increase range?
No specific range increase should be attributed to the harness itself. Range depends on the complete battery and powertrain configuration.
Can I use this with an X-9000-V3?
No. Use the appropriate X-9000-V3 E-Ride Pro 3.0 harness based on whether your bike has a circuit breaker
Is it waterproof?
The supplied product page does not specify an IP waterproof rating for this harness kit. Do not assume an IP rating that is published for a separate X-9000 controller applies to this harness.
Is assembly required?
This is an installation component rather than a complete plug-and-ride vehicle. Installation requires connecting the harness and mounting hardware to the compatible controller and E-Ride Pro 3.0.
What rider height is supported?
Rider height is not a specification of this harness and mounting kit.
Can I use it for off-road riding?
The harness is intended for installation on the E-Ride Pro 3.0, but off-road suitability depends on the complete vehicle and electrical installation. Follow the manufacturer's installation requirements.
Does it require a license?
Licensing requirements depend on how and where the completed E-Ride Pro is operated. Check your local laws before riding on public roads.
⚡ Upgrade the Installation. Keep the Setup Clean.
If your build uses an EBMX X-9000-V2 controller and an E-Ride Pro SS 3.0 with a circuit breaker, this dedicated harness and mounting kit gives you the essential wiring, brackets, hardware, and V3 battery wiring needed for the intended installation.
Build it right from the start.
Choose the EBMX X-9000-V2 E-Ride Pro 3.0 Harness & Mounting Kit for your compatible setup.
⚠️ Before purchasing: confirm that you have an X-9000-V2 controller and an E-Ride Pro 3.0 with a circuit breaker.